Block for stand SW120
Racks made of galvanized steel type SW120 in combination with newspapers and, possibly, with C-profiles type CL, CS, CX, CM and RH are used as a substructure of a split raised floor system. Lindner has its own production of full-cycle racks in Germany: from design to production, including galvanization.
The rack type SW120 allows you to create a space under the raised floor to accommodate communications. The SW120 rack has a high load-bearing capacity and a large stepless height adjustment range, thanks to which the roughness of the rough floor is leveled.
Brand
Lindner
Advantages
Height 159-1633 mm, high load-bearing capacity and corrosion protection, easy installation, does not contain 6-valent chromium, can be combined with C-profiles of other types CL, CS, CX, CM and RH
Specifications
Static
( More + )
| Seismic Safety | International Building Codes and Regulations (IBC).
Maybe in A - F. |
| Load and deflection class | According to EN 12825
1 (2 kN) – 5 (5 kN) |
| Safety factor | 2 |
Corrosion protection
( More + )
| Protection class | Galvanizing |
| Salt chamber test | 72 hours |
Technical information
Fire protection
( More + )
| Fire resistance of the system according to DIN 4102-2 | F30 |
| Fire resistance of the system according to DIN 13501-2 | REI30 and REI60 |
| Reaction of the bearing panel to the effect of fire according to EN 13501 | A1 (non-combustible) |
| Reaction of the bearing panel to the effect of fire according to EN 4102-1 | A2 (non-combustible) |
Acoustics
( More + )
| Horizontal sound insulation | 39-63 dB* |
| Sound insulation index | 62-64 dB* |
| Sound absorption coefficient of steps | 19-41 dB* |
| Reduced shock noise level index | 92-32 dB* |
*values depend on additional measures
