Lindner raised floors have significant load-bearing capacity. If the standard load-bearing capacity is insufficient, then the raised floor system can be supplemented with suitable reinforcing profiles.
Their range ranges from light stringers, stiffening the raised floor system, to profiles for electrical panels, increasing the load-bearing capacity of the structure.
RO type (height 7.5 mm) | The RO-stringer is made of cold rolled galvanized sheet steel and is fastened with a clamp. The clamping attachment (bolted connection optional) provides a strong fixation with the top of the rack, so that there is no metallic knock. This type of stringer is designed exclusively for horizontal reinforcement of the structure. |
Types RL (height 35 mm) and RM (height 54 mm) | Stringers RL (light, "light") or RM (medium, "medium") are made of cold-rolled galvanized sheet steel. There are spring mechanisms on the side at both ends of the stringers.
They are inserted vertically into the rack by pressing from above (bolted connection optional). RL or RM stringers are designed for horizontal and vertical reinforcement of the structure. |
Fire resistance of the system according to DIN 4102-2 | F30 |
Fire resistance of the system according to DIN 13501-2 | REI30 and REI60 |
Reaction of the bearing panel to the effect of fire according to EN 13501 | A1 (non-combustible) |
Reaction of the bearing panel to the effect of fire according to EN 4102-1 | A2 (non-combustible) |
Berlin,
Brunsbütteler Damm 180, b. 18/2, 13581
Berlin,
Brunsbütteler Damm 180, b. 18/2, 13581